FANGYUAN | Lab Test Instrument Producer

Position：home > News > Wenzhou Fangyuan Instrument Co., Ltd. Appears at 2017 Shanghai Textile Machinery Exhibition

Wenzhou Fangyuan Instrument Co., Ltd. Appears at 2017 Shanghai Textile Machinery Exhibition

Wenzhou fangyuan instrument co., ltd. covers an area of 5000 square meters and employs nearly 200 people. The company has successfully developed, manufactured and sold nearly 300 kinds of quality inspection instruments in the past ten years. Widely used in: fiber, down, spinning, weaving, printing and dyeing, clothing, zippers and hardware, leather, shoes, geosynthetics, automotive interiors, carpets, soft furniture, public transportation, building materials, wires and cables, packaging materials and other industries. It has formed research and development capabilities in mechanics, climate and environment, durability, microstructure analysis, protection, fire and other disciplines, and has successfully customized many batches of experimental instruments for Guangzhou Fiber Inspection Institute, National Knitting Standards Committee, Donghua University and other units.

Wenzhou fangyuan instrument co., ltd covers an area of 5000 square meters and employs nearly 200 people. The company has successfully developed, manufactured and sold nearly 300 kinds of quality inspection instruments in the past ten years. Widely used in: fiber, down, spinning, weaving, printing and dyeing, clothing, zippers and hardware, leather, shoes, geosynthetics, automotive interiors, carpets, soft furniture, public transportation, building materials, wires and cables, packaging materials and other industries. It has formed research and development capabilities in mechanics, climate and environment, durability, microstructure analysis, protection, fire and other disciplines, and has successfully customized many batches of experimental instruments for Guangzhou Fiber Inspection Institute, National Knitting Standards Committee, Donghua University and other units.

FFZ191Ⅱ Moisture Evaporation Rate Detector Application: Assessment of Moisture Absorption and Rapid Drying of Textiles.

Conform to standards: GB / t21655.1 2008, etc.

Instrument characteristics:

1. Imported high-precision mass weighing system with accuracy of 0.001 g is adopted.

2. The key components are made of imported stainless steel or alloy steel.

3. Drive motor is adopted, the whole machine runs smoothly and has low noise.

4. Optimize structural design and position accurately;

5. Intelligent operation;

6, Man-machine interface, test results at a glance;

7, Test weighing interval time set range;

8. There are two ways to terminate the test: mass change rate and test time.

9. Automatic calculation and generation of test results;

10. Test result curve is automatically generated and multi-station curve can be displayed simultaneously.

11. The test data is accurate, and the evaporation rate can be calculated manually or automatically.

12, Has a strong database document management function;

13. There is a calibration station, and the test can be resumed after calibration if the sample weighing is abnormal.

FFZ413 Textile Contact Instant Cold Sense Tester

Uses: Used to test the coolness of pajamas, bedding, cloth and underwear, and also to measure the thermal conductivity.

Meet the standard: FTTSFA019 fabric instant cooling test method.

Instrument characteristics:

1. Electrostatic spraying is used on the surface of the instrument, which is durable.

2. The panel is made of imported special aluminum.

3, Desktop type, with feet.

4. Some leakage parts are processed with imported special aluminum.

5. Color touch screen display is beautiful and elegant, with menu mode of operation, which is as convenient as a smart phone.

6. The core control components are Italy's 32 - bit multi-functional motherboard.

7. Automatic testing, automatic calculation test results.

8. High - precision sensors are used for the heating plate and the thermal detection plate.

FFZ471 Textile Negative Ion Tester

Application: The dynamic negative ion generation of textiles under different friction conditions is measured by controlling friction pressure, friction velocity and friction time.

Compliance standard: GB / T3

Compliance standard: GB / t301282013.

Instrument characteristics:

1. The fuselage adopts metal paint;

2. The outer cover is made of plexiglass with high perspective.

3. Special aluminum panel, imported metal keys, sensitive operation, not easy to damage;

4. Precision high-grade motor drive, smooth operation, low noise.

FY258C thermal resistance and wet resistance testing system

1. The climate chamber adopts YM channel device technology to control temperature and humidity.

2. The membrane imported from Britain ( common membrane is adopted by domestic peers ) has smaller pore diameter and is highly close to human skin, thus highly simulating skin sweat effect.

3. The test board adopts the overall structure, no leakage; High - performance insulation materials are used between the experimental board and the protective board, so that thermal interference is less, data reproducibility is high, and overall stability is strong.

4. The test plate is formed by processing tiny ( nano - scale ) particles of metal through a special process, with smaller pore diameter, higher heat conduction efficiency, stronger water permeability and more uniform.

5. Advanced software control algorithm reduces the thermal inertia of the test bed and improves the repeatability of the test.

6. Won two national technology patents.

Usage: Used to measure shrinkage and relaxation of various cotton, wool, hemp, silk, chemical fiber fabrics, clothing or other textiles after washing.

Compliance with standards: GB/T86292017, FZ/T 70009, ISO63302012, ISO5077, 6330, MS P1, P1AP3A, P12, P91, P99, P99A, P134,BS EN 25077, 26330, IEC 456, etc.

Instrument characteristics:

1. All mechanical systems are specially customized by professional household laundry manufacturers, with mature design and high reliability of household electrical appliances.

2. The supporting damping technology is adopted to make the instrument run stably and have low noise.

3. Large screen color touch screen display operation, Chinese and English operating system optional;

4. The shell is made of stainless steel, which is anticorrosive, beautiful and durable.

5. Open self-editing program function, which can store 50 groups;

6. Supporting standard washing procedures, manual single control;

7, Hanging washing drum, no need to install cement foundation;

8. High - performance frequency converter, frequency conversion motor, stable high-low speed conversion, low motor temperature rise, low noise, and free setting of rotation speed;

9. The air pressure sensor precisely controls the water level.

YG026MG Electronic Fabric Strength Machine

Usage: This instrument is a high-grade machine with perfect function, high precision and stable and reliable performance for domestic textile industry. Widely used in yarn, fabric, printing and dyeing, fabrics, clothing, zippers, leather, non - woven, geotechnical materials and other industries of tensile breaking, tearing, bursting, peeling, seams, elasticity, creep and other tests. Color touch screen display, full Chinese or English menu operation; Stmicroelectronics ST Series 32 - bit Single Chip Microcomputer and 16 - bit A/D Converter Control; Ac servo drive and motor ( vector control ), ball screw and precision guide drive produced by Germany Rexroth company. The software can be customized according to user's requirements.

Conform to standards: GB/T, FZ/T, ISO, ASTM and other standard systems. For details, please refer to the functional configuration table of the powerful machine.

Instrument features: color touch screen display, operating model.

1. The special aluminum frame and the whole machine shell are treated with metal baking varnish to make the whole machine more exquisite and thick.

2. Imported servo drive and motor ( vector control ) are adopted, which has short response time and no speed overshoot and uneven speed.

3. Select ball screw and precision guide rail made by German Rexroth Company, with long service life, low noise and small vibration.

4. Equipped with imported encoder to control the positioning and elongation of the instrument.

5. Equipped with high-precision sensors, ST series 32 - bit MCU of stmicroelectronics Company and 16 - bit A/D converter of AD Company of the United States.

6. With large color touch screen display operation.

7. Equipped with pneumatic clamps, the clips can be replaced and customized according to customer's materials.

8. Built-in 17 test functions, and can be customized according to customer needs.

9. Online software supports windows operating system.

10. The instrument supports bidirectional control of the host computer and the computer.

11. Digital setting of pre-tension software.

12. Digital setting of spacing length and automatic positioning.

13. Conventional protection: mechanical switch protection, upper and lower limit stroke, overload protection, over - voltage, over - current, over - heat, under - voltage, under-current and leakage automatic protection, emergency switch manual protection.

14. The selection and determination conditions for the peak value of tear and peel test curves can be set by the customer.

15. Force value calibration: digital code calibration ( authorization code ) to facilitate instrument verification and control accuracy.

16. The standard modular design of the complete circuit facilitates the maintenance and upgrade of the instrument.

YG461EIIair permeability tester

Uses: Used for testing the air permeability of industrial fabrics, non-woven fabrics, coated fabrics and other industrial paper ( air filter paper, cement bag paper, industrial filter paper ), leather, plastic and chemical products that need to be controlled.

Compliance with standards: GB/T5453, GB/T13764, ISO 9237, EN ISO 7231, AFNOR G07, ASTM D737, BS5636, DIN 53887, EDANA 140.1, JIS L1096, TAPPIT251, etc.

Instrument characteristics:

In July 2014, Wenzhou fangyuan instrument co., ltd. successfully established a measurement and transmission system for air permeability test based on mass flowmeter after more than 3 years of continuous efforts, which solved the traceability problem of air permeability test and greatly improved the measurement accuracy. Nearly 20 YG461E air permeability testers have been sold and upgraded YG461EII will be launched in December 2015.

● This machine is designed to be able to complete a test by pressing the clamper lightly in combination with the characteristics of large amount of actual testing by fiber inspection, quality inspection, commodity inspection and third-party notarization testing organizations in various regions. No other operations are required, and data are automatically saved, thus improving the testing efficiency.

● The instrument adopts new technology, high configuration and imported metal baking varnish for the whole casing. The appearance is beautiful, the performance is stable, the operation is convenient, no special maintenance is required in the future, and the maintenance cost is low. Display and operation of large screen color touch screen.

1. The large-screen color touch screen can be used for control test alone or with a computer. The computer can display the dynamic curve of differential pressure air permeability in real time, which is convenient to control the product quality and enables researchers to know the air permeability of samples more intuitively.

2. High - precision imported micro-differential pressure sensor is adopted, with good repeatability of measurement results and little error compared with data from foreign brands, which is obviously superior to related products produced by domestic peers.

3. Fully automatic measurement is realized. The sample is placed in the specified position. The instrument automatically searches for the appropriate measurement range and automatically adjusts the measurement.

4. Pneumatic clamping sample, fully meet the clamping requirements of various materials;

5. The instrument uses a self-designed silencer to control the suction fan, which solves the problem of large noise caused by large pressure difference for similar products.

6. The instrument is equipped with standard calibration orifice plate, which can quickly complete calibration to ensure the accuracy of data.

7. The long-arm clamping handle can be used to measure large samples without cutting large samples into small ones, thus greatly improving the work efficiency.

8. The special aluminum sample table is processed by the metal baking varnish process for the whole machine shell, which is durable and the appearance of the whole machine is elegant and easy to clean.

9. The operation of the instrument is very simple. The interface between Chinese and English is interchangeable. Even inexperienced personnel can operate it freely.

10. Test method: quick test ( single test time is less than 30 seconds, quick results can be obtained );

Stability test ( the fan suction speed increases at a constant speed, reaches the set pressure difference, and maintains the pressure for a certain period of time to obtain the result, which is very suitable for some fabrics with relatively small air permeability to complete high-precision test ).

YG502ⅢA fabric pilling tester

Manufacturers Designated by Standard Brush Textile Metrology Committee

Special Model Developed by National Piling and Pilling Rating Sample Photograph

Imported linear slider drive, stable and durable

Quiet motor drive, low noise

Purpose: To evaluate the fuzzing and pilling of various woven fabrics and woven fabrics.

Meet the standards: GB / t4802.1 etc.

Instrument characteristics:

1. The shell of the whole machine is made of metal baking varnish, and the operation console and some accessories are made of special aluminum, which is beautiful and elegant.

2. 316 stainless steel grinding head and stainless steel weight will never rust.

3. Imported special aluminum wire drawing panels are intuitive and clear.

4. Large screen color touch screen display operation, with Chinese and English bilingual operating system; Metal keys are not easy to damage.

5. The transmission sliding mechanism adopts imported linear sliding block, which runs smoothly.

6. The silent drive motor is equipped with a speed regulator, which has low noise.

YG611B02 Color Fastness Tester for Sunlight Weather

Uses: Used for light fastness, weather fastness and light aging tests of colored materials such as textile, printing and dyeing, clothing, automotive upholstery, geotextile, leather, artificial board, wood floor, plastic, etc. By controlling the items of light irradiance, temperature, humidity, rain and the like in the test chamber, the simulated natural conditions required by the experiment are provided to detect the light fastness, weather fastness and light aging performance of the sample; Has on-line control of illumination intensity; Automatic monitoring and compensation of illumination energy; Closed loop control of temperature and humidity; Blackboard temperature loop control and other multi-point adjustment functions. Comply with U.S., European and national standards.

Meet the standard: AATCC16, 169, ISO105B02, ISO105B04, ISO105B06, ISO48922A, ISO48922B, GB/T8427, GB/T8430, GB/T14576, GB/T16422.2, 1865, 1189, GB/T15102, GB/T15104, JIS 0843, GMW 3414, SAEJ1960, 1885, JASOM346, PV1303, ASTM G1551, 1554, etc.

Features:

● Numerous repetitions of the same environment.

● Meet many national standards of AATCC, ISO, GB/T, FZ/T and BS.

● Large color touch screen display with various expressions: numbers, charts, etc. Real - time monitoring curves of light irradiance, temperature and humidity can be displayed; And store a variety of testing standards, convenient for users to directly select calls.

● Safety protection monitoring points ( irradiance, water level, cooling air, temperature in the warehouse, warehouse door, overcurrent and overpressure ) realize unattended operation of the instrument.

● Imported 3000W long arc xenon lamp illumination system to simulate sunlight spectrum.

● The position of the irradiance sensor is fixed to eliminate measurement errors caused by rotating vibration of the turntable and refraction of light when the sample turntable rotates to different positions.

● Illumination energy automatic compensation function.

● Dynamic balance technology for temperature ( irradiation temperature, heating of heater ), humidity ( humidification by multiple groups of ultrasonic atomizers, humidification by saturated steam ).

● Quick control of BST and BPT.

● Water circulation and water purification equipment.

● Independent timing function for each sample.

● Dual - loop electronic redundancy design ensures long-term continuous trouble-free operation of the instrument.

FFZ 191 - II Moisture Evaporation Rate Detector

FFZ413 Textile Contact Instant Cold Sense Tester